Network Design Services. Build advisory.
Infrastructure-Grade Networks for Complex, High-Value Properties.
We design networks for new builds and existing buildings — infrastructure that works on day one and adapts for decades. For Bay Area architects, general contractors, and builders.
The Problem
When Network Planning Is an Afterthought, Everyone Pays the Price.
The Scenario
The building is finished, the client moves in – and three months later, the call comes: “The WiFi doesn’t work.” Dead zones in conference rooms. Security cameras that can’t reach the server. An access control system that was never wired for.
The Cost
Tearing open finished walls. Routing cables through ceilings that were never designed for it. Change orders, delays, and a client who wonders why nobody thought of this sooner.
The Fix
A network specialist at the table – before the walls go up, or before the next renovation cuts into them.
Why It Matters
Network Cabling Is Not Like Electrical or Plumbing.
Electrical wiring and plumbing are install-and-forget. 110V is 110V – today, in ten years, in thirty. Water flows the same way it always has.
Network infrastructure operates on a different timeline. Cat 5 was standard. Then Cat 5e. Then Cat 6. Now Cat 6a. Every cycle brings new bandwidth demands, new device types, new expectations.
And the role of cabling itself is shifting. In ten years, almost nobody will plug an Ethernet cable into a laptop. But access points, security cameras, displays, and access control systems will still run on wired connections. Cable is becoming the backbone that feeds the endpoints – not the endpoint connection itself.
| The Electrician Thinks | BC PRO Thinks |
|---|---|
| One cable per room, done | Where do access points sit for optimal coverage across the entire floor? |
| Standard conduit, sealed in | Where will cameras hang in two years? How do we reach them? |
| Not my department | How do we supply PoE to 40+ devices without a second power run? |
| It's in the wall now | How do we access and replace everything in 10 years - without tearing anything open? |
Where Network Planning Goes Wrong on Build Projects
Three Common Failures in How Buildings Get Connected.
Cable Without a Plan
Pulled by the Electrician
Network cabling treated like a power run – whoever’s already pulling wire adds a few Cat 5 jacks. No backbone, no documentation, no spec. Three years later nobody knows where anything terminates.
IT Vendor After Move-In
The Retrofit Tax
Network gets called in once the building is finished. Cable runs surface-mounted in conduit, access points where outlets happen to be, change orders for everything that should have been planned. The bill is two to three times what design-phase planning would have cost.
No Specialist at All
Network as Afterthought
Nobody owns the network on the design team. The architect assumes the GC handles it, the GC assumes the IT vendor handles it, the owner assumes someone has thought about it. By move-in, the gap is everyone’s problem and nobody’s deliverable.
BC PRO Solution
A Network Specialist at the Planning Table
Network design lives in the drawing from the start – a documented backbone, every access point on its own Ethernet run, hardware sized for what the building actually does. Conference rooms, lobbies, mechanical floors, outdoor zones: each one specified, each one verifiable on site. The trades execute, the network you specified is the network that gets built.
The Result
A Building Where Connectivity Just Works.
No complaints. No callbacks. No change orders. This is what happens when a network specialist is part of the planning team from the start.
01 / Architect
Reputation Intact
Your design vision extends to every system in the building. Network infrastructure that works seamlessly means no callbacks, no blame, no gaps in the handover.
Planned from day one
02 / General Contractor
Truly Finished Projects
Hand over a building where every system works – not just the visible ones. No last-minute subcontractors, no change orders for forgotten cable runs.
No surprises at handoff
03 / Building Owner
Connected From Move-In
Video calls connect without a thought. Security cameras cover every angle. Access control opens doors and logs entries. Every floor, every zone – online, reliable, fast.
Works on day one
What We Deliver
Designed for Build. By a Network Specialist Who Stays in the Drawing.
New builds, renovations, tenant improvements – one specialist from floor plan to handover-ready design package. We deliver the design, your trades execute it. We stay involved during construction as advisors so the network you specified is the network that gets built.
Network Architecture & Layout
Complete network topology tailored to the building’s purpose, size, and usage patterns. Every floor, every zone, every use case mapped.
Cable Pathway Planning
Structured cabling routes designed for accessibility and future upgrades. No cables buried in concrete, no undocumented runs behind drywall.
Heat Mapping
Optimal placement for full wireless coverage based on building materials, floor plans, and expected device density. Engineered coverage, not “one per room.”
PoE & Device Provisioning
Power-over-Ethernet planning for cameras, access points, displays, and access control – eliminating the need for separate power runs to network devices.
Security Built In, Not Bolted On
Segmented networks, hardened configurations, encrypted management, guest isolation. You don’t pay extra for a secure network – you get one.
Hardware Demand Calculation
Device count, port density, PoE budget, switch sizing – calculated from the floor plan and usage profile before a single SKU is ordered. No over-spec, no last-minute scramble.
Cable Length Bill of Materials
Per-run measurements, slack reserves, and a documented schedule the installing trade can pull, label, and terminate without guesswork.
Hardware Configuration Plan
VLANs, SSIDs, firewall rules, controller setup – delivered as a configuration document the on-site integrator can apply step by step.
Build Advisory
RFI responses, change-order review, on-call clarification during construction. Your trades execute, we keep the design intact.
Future-Proofing
Accessible cable ducts, modular backbone design, and documented infrastructure that can evolve with technology – not against it.
How We Work
From Blueprint to Spec Handoff - Designed Into Your Build Process.
Understand
A detailed on-site assessment to map your property, challenges, and goals. What systems need network access – now and in five years?
Design
A custom high-performance network plan: topology, cable pathways, AP placement, PoE provisioning, backbone structure. Documented and ready.
Specify
BoM, cable schedule, and hardware configuration handed to your installing trade. They build, you can verify against the spec at every milestone.
Build Support
On-call advisory during construction. Your trades pull, terminate, and configure. We answer RFIs, walk site changes back into the design, and verify the installed network matches the spec.
"Network cabling is as fundamental as electrical and plumbing. But unlike power and water, it has a technological lifecycle. A plan that ignores this reality is outdated before the building is occupied."
- BC PRO Principle
Network Experts
Specialized, not generalist
Guaranteed Results
Performance, not promises
Premium Hardware
Ubiquiti enterprise platform
Design-Spec Handover
Plan, BoM, config plan – ready to build
Battery Backup
Always-on connectivity
Cloud Management
Remote monitoring & control
Customizable Security
Segmented, hardened, encrypted
Indoor & Outdoor
Full property coverage
Our Track Record
Across our installations, we’ve built a reputation for transforming unreliable networks into fast, seamless systems. Our clients value our clean installations, attention to detail, and ability to eliminate dead zones, even in large, complex buildings. Whether it’s WiFi, network upgrades, or integrated building systems, we deliver fast, reliable results that just work.
Aggregated from client feedback. Individual reviews are not shown due to non-disclosure agreements.
Why BC PRO
The Network Specialist Your Projects Have Been Missing.
One Ecosystem, No Conflicts
BC PRO builds on Ubiquiti’s enterprise platform – networking, security, access control, all integrated. One ecosystem means fewer compatibility issues, simpler management, and a single point of accountability.
No Hardware Margin, No Hidden Agenda
BC PRO does not profit from recommending one product over another. We are paid for expertise and results. The best solution for your project is always the best solution for us.
Built on Real-World Experience
From luxury residences to a full museum installation, BC has designed and installed network infrastructure for complex, demanding properties. BC PRO brings that same hands-on expertise to commercial and construction projects.
Advisor, Not Vendor
BC PRO sits at the planning table as a specialist – not as a subcontractor waiting for instructions. We contribute to the design conversation early, when decisions still cost nothing to change.
Ready?
Bring a Network Specialist to the Table - New Build, Renovation, or Already Standing.
Whether you’re planning a new build, a renovation, or a tenant improvement – the earlier network infrastructure is part of the conversation, the better the outcome for everyone.